Turkey client visit our factory to check the particle board machine

• core veneer peeling production line
  • spindleless wood log debarker
  • spindleless veneer peeling machine
  • veneer stacker
  • 4ft veneer peeling machine line
  • 8ft veneer peeling machine line
• face veneer peeling machine line
  • spindle wood log debarker
  • spindle veneer peeling machine
  • veneer clipper
  • veneer stacker
  • spindle veneer peeling machine production line
• thick veneer peeling machine
• kinfe grinding machine
• veneer composer
• veneer paving machine
• plywood cold press machine
• plywood hot press machine
  • ordinary plywood hot press macihne
  • film face lamination hot press machine
  • melamine paper lamination hot press machine
• short cycle lamination hot press machine
• plywood end cutting saw
• glue mixer glue spreader machine
  • glue mixer
  • 4ft glue spreader
  • 8ft glue spreader
• veneer dryer machine
  • core veneer roller dryer machine
  • face veneer mesh dryer machine
  • face veneer wire dryer machine
  • core veneer hot press type veneer dryer machine
• automatic mat board putty machine
• sanding machine
  • automatic sanding machine line
  • sanding machine
• boiler
• other accessory equipment
  • lift table
  • overturning machine
  • Core edge grinder machine
  • Veneer press joint machine

Particle board is made from small-diameter wood, branches, wood residues and non-wood agricultural residues via Chip preparation, drying, spreading and hot press section. Finished boards can be used for furniture, building, packing, vehicle and decoration and lamination.
1.Chip preparation section
Raw material is processed into qualified chips by the drum chipper, then the chips are transported to the chip silo, and then feed to the knife-ring flaker by which the chips are turned to flakes, finally the flake stored in wet flake silo.
2.Drying and sifting section
The flakes discharged from the wet flake silo are conveyed to the rotary dryer or three-way dryer machine. After drying process, qualified core flakes are stored in core dried particles silo; oversize flakes are send to mill to be re-grinding, and transported to surface particles silo.
3.Glue regulating and blending section
After scaled, the core and surface flakes are to be effectively and uniformly mixed with qualified glue independently via face layer glue blender machine and core layer glue blender machine.
4.Forming and hot-pressing section
The surface and core flakes are sent into diamond-forming machine, and forming on the mat conveyor uniformly. After processes of metal remover, pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press. Rough boards after pressing are pushed to unloader.
5.Cooling and sizing section
The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift.
6.Sanding Section
The board are sanded, checked and stored .

On 18th,Oct.2017 Turkey client visit our factory to check the particle board machine. they plant to open a new particle board factory.Iall particle board production line can be produced by us from 5000CBM-10000CBM.

If you want more details,please feel free to contact us:

MOBILE:+8615064931296
WHAT'S APP:008615064931296
WECHAT:15064931296
SKYPE:skype2014102
EMAIL: jacky@geelonggroup.com
WEB: www.geelongmachinery.com
www.geelonggroup.com
Alibaba Gold Supplier:
Http://lygeelong.en.alibaba.com